American Standard 2545202.02 0 Town Square Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This american standard 2545202 02 0 town square review focuses on a standard alcove soaking tub designed for recessed installation. Measuring 60 inches long by 30 inches wide, it offers a classic footprint for most bathrooms. The unit stands 20 inches tall and weighs nearly 100 pounds. It features a left-hand drain configuration, which you must verify against your plumbing layout before purchasing. The white acrylic surface provides a clean, traditional look that coordinates with other Town Square fixtures. This model prioritizes straightforward installation and durability over complex features.
What stands out
- Integral 3-sided 1-inch tiling flange for secure water retention
- Sloped lumbar support for added comfort during baths
- High-gloss acrylic surface reinforced with fiberglass
- Pre-leveled tub bottom to simplify leveling during setup
Who it fits
Good fit for
This tub suits homeowners planning a recessed installation in a standard alcove. The 60x30 dimensions fit typical bathroom layouts where space is efficient but not cramped. If you prefer a traditional aesthetic, the integral apron and white finish match well with other Town Square S suite items. The pre-leveled bottom helps DIYers avoid common leveling issues. It is also a good choice if your plumbing lines are positioned on the left side, as the drain location is fixed.
Who should skip it
You should look elsewhere if your bathroom requires a right-hand drain, as this model is left-drain only. Check the variations for the right-drain option if needed. The 20-inch height may be low for users who prefer deeper soaking tubs or have mobility concerns. If you need a freestanding unit or a corner tub, this recessed model will not fit your layout. The lack of adjustable features means you must commit to the fixed slope and dimensions.
Verdict: The American Standard Town Square S is a reliable, spec-driven choice for standard alcove installations. It delivers straightforward functionality and traditional styling without unnecessary complexity.
Key specs explained for this tub
Length: 60 inches
This length provides ample space for most adults to stretch out. You get enough room to relax without the tub dominating your floor plan. Compare this to 48-inch models if you have a smaller bathroom. The 60-inch size is a standard choice for alcove installations, fitting well in typical residential layouts.
Width: 30 inches
A 30-inch width offers a comfortable seating area for your body. It is wide enough to prevent feeling cramped while you soak. Standard alcove tubs often share this width. You should check your bathroom layout to ensure there is enough clearance on the sides for this standard footprint.
Height: 20 inches
This height determines how much water the tub holds and how deep you sit. A 20-inch depth is standard for soaking tubs, allowing for a comfortable water level. It is not extra-deep, so it suits those who prefer traditional soaking depths. Consider this when planning your bathroom floor level.
Drain Location: left
The drain is positioned on the left side when you face the tub from the room. This matters for your plumbing connections. You must align your drain pipe with this specific side. If your existing plumbing is on the right, you will need to adjust your installation plan or choose a different model.
Design and Build Quality
The tub is constructed from high-gloss acrylic reinforced with fiberglass. This material choice helps maintain a smooth, clean surface while providing structural durability. The listing states the finish is white, which coordinates with the Town Square S bathroom suite. This consistency simplifies a complete remodel by matching other fixtures in the same line.
Structurally, the unit features an integral apron with traditional styling. It includes a three-sided tiling flange that is one inch thick. This flange retains water and allows for straightforward installation against walls. The bottom of the tub is pre-leveled, which reduces the effort needed to ensure it sits flat during setup. You also get a sloped lumbar support built into the design. This curve is intended to offer more comfortable bathing by supporting your lower back.
The physical layout is defined by its dimensions and drain position. It measures 60 inches in length and 30 inches in width. The height is 20 inches, and the unit weighs 99.8 pounds. According to the listing, the drain is located on the left side. This specific configuration requires you to plan your plumbing accordingly. The tub is designed for recessed installation, meaning it fits into a framed alcove rather than standing alone. This setup integrates the tub seamlessly into the bathroom structure.
Setup and Everyday Use
Installation requires a recessed alcove. The tub features a pre-leveled bottom to simplify leveling during setup. You will need to frame the unit into the wall structure. An integral three-sided tiling flange is included. This one-inch flange helps retain water and supports tile work along the walls. It simplifies the transition between the tub and surrounding surfaces. The left-hand drain location determines how you position the plumbing. Ensure your supply lines and drain pipes align with this side. If you prefer a right drain, check the available variations. Daily use benefits from the sloped lumbar support. This design element provides additional comfort for your lower back while you soak. The high-gloss acrylic surface is easy to wipe clean. Fiberglass reinforcement adds structural integrity, which helps the tub maintain its shape over time. The integral apron offers a clean, traditional look that requires no additional covering. You can coordinate this unit with other Town Square S fixtures for a unified aesthetic. The limited lifetime warranty covers manufacturing defects, providing long-term assurance. Weight is approximately 99.8 pounds. This mass helps stabilize the tub during use, reducing movement when you enter or exit. Standard 60 by 30 inch dimensions fit most standard bathrooms. You do not need a custom enclosure for this model.
Before You Buy This Tub
You need to verify your bathroom layout before purchasing this American Standard Town Square S model. It is designed strictly for recessed installation, so you must have a framed alcove ready. Check that your space can accommodate the 60-inch length and 30-inch width. The left-hand drain location is fixed, so confirm your plumbing pipes align with the left side. If your pipes are on the right, this unit will not work without significant modification. You should also plan for tile installation along the three-sided flange. The high-gloss acrylic surface requires gentle cleaning to maintain its finish. Avoid abrasive pads that might scratch the material. This tub fits well if you prefer a traditional, spacious soak. It suits those who value durability and standard dimensions. If you need a right-drain option, look for the alternative variation. This model is a solid choice for standard bathroom renovations where space is not a constraint.
Check before you buy
- Confirm your alcove is at least 60 inches long.
- Ensure plumbing pipes align with the left drain.
- Check if you have framing ready for recessed install.
- Verify you can tile against the three-sided flange.
The product at a glance
American Standard Town Square S 60x30 Bathtub
Best for: Traditional left-drain alcove installations
- Length
- 60 inches
- Drain Location
- left
- Mount Type
- recessed
- Color
- White
- Dimensions
- 60 × 30 × 20 inches
- Weight
- 99.8 pounds
View on Amazon: American Standard Town Square S 60x30 Bathtub Affiliate link
This 60 x 30-inch alcove bathtub features a left-side drain and a 20-inch depth. It includes a sloped lumbar support for comfort and a pre-leveled bottom for easier installation. The high-gloss acrylic shell has a 1-inch tiling flange. It is designed for recessed mounting and coordinates with the Town Square S suite.
Pros
- Sloped lumbar support for comfort
- Integral 3-sided tiling flange
- Pre-leveled tub bottom
- High-gloss acrylic with fiberglass
Cons
- Left drain only in data
- Heavy 99.8-pound weight
- Requires recessed installation
Good fit if
- You need a 60-inch left drain tub
- You want a sloped backrest
- You are remodeling a Town Square suite
Skip if
- You require a right drain
- You need a freestanding tub
- You cannot support heavy weight
Verdict: American Standard Town Square 60-Inch Left Drain Tub suits those who need a standard left-drain alcove tub with a comfortable backrest. It fits well in traditional bathrooms where recessed installation is planned.
Specifications side by side
| Spec | American Standard Town Square S 60x30 Bathtub |
|---|---|
| Length | 60 inches |
| Drain Location | left |
| Mount Type | recessed |
| Color | White |
| Dimensions | 60 × 30 × 20 inches |
| Weight | 99.8 pounds |
| Model | 2545202.020 |
Frequently asked questions
Is this bathtub suitable for a standard alcove installation?
Yes, this model is designed specifically for traditional left-drain alcove installations. It features a pre-leveled bottom to simplify the leveling process during setup. You will need to frame the unit into the wall structure, as it requires a recessed alcove for proper placement.
What are the exact dimensions of the American Standard Town Square tub?
The tub measures 60 inches in length, 30 inches in width, and 20 inches in height. These dimensions provide a classic footprint that fits well in most bathrooms. The unit weighs 99.8 pounds, which is typical for an acrylic and fiberglass construction of this size.
Does this tub come in colors other than white?
No, the listing specifies that the finish is white. This color coordinates with the Town Square S bathroom suite, ensuring a consistent look if you are matching other fixtures. No other color options are mentioned in the published specifications for this model.
Is the drain located on the left or right side?
The drain is located on the left side. This left-drain configuration suits those who need a standard setup for their bathroom layout. Verify your existing plumbing or framing to ensure the left-side drain aligns with your planned installation space before purchasing.
How much space does this bathtub require in a bathroom?
You need a recessed alcove that can accommodate a 60-inch length and 30-inch width. The 20-inch height allows for comfortable seating without dominating the floor plan. Ensure your framed alcove is ready before installation, as the tub is designed strictly for recessed placement.
What material is used to construct this soaking tub?
The tub is constructed from high-gloss acrylic reinforced with fiberglass. This material choice helps maintain a smooth, clean surface while providing structural durability. The white finish is part of the Town Square S suite, offering a classic aesthetic that is easy to clean and maintain.
Does this model include a tiling flange for installation?
Yes, the unit includes an integral three-sided tiling flange. This one-inch flange helps retain water and supports tile work along the walls. It simplifies the installation process by providing a secure edge for your tiling contractor to work with during the recessed setup.