American Standard 2573102.020 Studio 60x30-inch Bathtub Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This american standard 2573102 020 studio 60x30 inch bathtub review focuses on the practical details of the Studio model. It is a white, above-floor rough-in tub designed for recess installation. The defining specs are its 60-inch length and 30-inch width. These dimensions create a standard alcove footprint that fits most standard bathroom layouts. The unit weighs 76 pounds and stands 18 inches high. This straightforward design prioritizes function over form, offering a clean, minimalist aesthetic with an integral apron. It is built for homeowners who need a reliable, no-frills soaking option.
What stands out
- High-gloss acrylic surface with fiberglass reinforcement for durability.
- Integral three-sided, 1-inch tiling and water retention flange to prevent seepage.
- Pre-leveled tub bottom simplifies the installation process.
- Integral lumbar support adds comfort during use.
Who it fits
Good fit for
This tub suits homeowners installing a standard alcove bathtub in a recessed space. The 60x30-inch size is ideal for bathrooms that require a traditional footprint. The above-floor rough installation makes it a good choice for renovations where subfloor height is a factor. The integral apron and minimalist design work well in modern or contemporary bathrooms. You will appreciate the pre-leveled bottom if you are handling the installation yourself or want to reduce setup complexity.
Who should skip it
You should look elsewhere if you need a freestanding tub or a soaking tub with greater depth. This model is 18 inches high, which is standard rather than deep. It is designed for alcove installation, so it will not work for standalone setups. If you require a left-hand drain, note that this specific listing is for the right drain, though variations exist. The integral apron means you cannot access the plumbing from the outside without removing the tub. Those seeking a luxury spa experience may find the basic features insufficient.
Verdict: The American Standard Studio 60x30 is a practical, spec-driven choice for standard alcove installations. It offers reliable durability and easy setup for typical bathroom renovations.
Key Specs Explained
Length: 60 inches
This length provides ample space for most adults to stretch out comfortably. It is a standard size that fits well in typical bathrooms. You can expect enough room to relax without the tub taking up excessive floor space. When shopping, compare this to smaller 54-inch models if you have limited square footage or larger 72-inch units for more luxury.
Width: 30 inches
A 30-inch width offers a balanced soaking area that supports your body without being too narrow. This dimension ensures stability while you recline. It is wide enough to accommodate most body types comfortably. Check this spec against narrower 27-inch tubs if you prefer a tighter fit or wider models if you desire extra lateral space for movement.
Mount Type: Above floor rough installation
This tub is designed to sit on top of your subfloor rather than being recessed into the floor structure. This installation method simplifies the build process and reduces structural modifications. It is ideal for renovations where lowering the floor is not feasible. Compare this to alcove tubs that require a different framing approach to ensure your contractor understands the setup.
Weight: 76 pounds
Weighing 76 pounds, this tub is manageable for two people to handle during installation but requires a sturdy floor support. The weight indicates a solid construction that will not flex easily under use. Consider your floor joist strength before installation. Lighter acrylic models may feel less substantial, while heavier cast iron tubs require significantly more structural reinforcement.
Design and Build Overview
According to the listing, the American Standard Studio tub is constructed from high-gloss acrylic with fiberglass reinforcement. This material choice suggests a surface that is smooth to the touch and resistant to chipping. The fiberglass backing adds structural integrity to the thin acrylic shell. You get a white finish that matches standard bathroom fixtures. The integral apron provides a clean, minimalist look. This design means you do not need to install separate panels on the visible side. The tub is built for recess installation above the floor rough-in. This layout requires you to frame the tub into the wall structure properly.
The dimensions are 60 inches long and 30 inches wide. The height is 18 inches. These measurements fit standard alcove spaces in most homes. The unit weighs 76 pounds. This weight is manageable for two people to lift, but you should still plan for careful handling during placement. The listing notes a pre-leveled tub bottom. This feature helps ensure the tub sits flat without excessive shimming. An integral lumbar support is included for extra comfort. You also get a three-sided, one-inch tiling or water retention flange. This flange helps prevent water seepage behind the tub. It simplifies the tiling process around the perimeter. The drain is not specified in this data, so you will need to check for left or right drain options in the variations. The design prioritizes straightforward installation and durable daily use.
Installation and Daily Use Notes
Setting up this tub involves preparing for an above-floor rough installation. The listing specifies it is designed for recess installation, meaning it fits into a framed enclosure rather than sitting on the floor. You will need to construct walls around the tub’s exterior. The unit includes a pre-leveled tub bottom, which simplifies the leveling process during setup. This feature helps ensure the tub remains stable without excessive adjustment. The integral three-sided, one-inch tiling and water retention flange is a key practical detail. This flange helps prevent water seepage behind the walls, protecting your bathroom structure from moisture damage. You should align your tile or wallboard with this flange during installation.
Daily use centers on the tub’s physical dimensions and comfort features. At 60 inches long and 30 inches wide, the footprint is standard for alcove bathrooms. The height is 18 inches, which determines how you enter and exit. The integral apron provides a clean, minimalist front that requires no additional finishing. Inside, the tub offers integral lumbar support. This built-in feature is designed to provide extra comfort while you soak. The high-gloss acrylic surface with fiberglass reinforcement is easy to wipe down after use. The white finish matches standard bathroom fixtures. You simply place the tub in the framed space, secure it, and connect the plumbing. The design prioritizes straightforward installation and functional comfort.
Before You Buy This Tub
Before finalizing your purchase, verify your rough-in dimensions match the 60x30-inch footprint. You must confirm the wall framing allows for the integral three-sided tiling flange. This 1-inch flange is critical for preventing water seepage behind your walls. Check if you need a specific drain orientation, as variations exist for right or left drain setups. The above-floor rough installation requires you to build a proper enclosure around the tub. You will need to source your own faucet and drain assembly, as these are not included. Routine care involves wiping the high-gloss acrylic surface with mild cleaners to maintain its finish. Avoid abrasive pads that could scratch the material. This model fits well alongside other standard alcove options if you prioritize a minimalist design. It is a practical choice for bathrooms where space efficiency matters. Ensure your plumbing connections align with the pre-leveled bottom for a smooth install.
Check before you buy
- Measure your rough-in space to ensure it fits the 60x30-inch dimensions.
- Confirm you can accommodate the 1-inch tiling flange on all three sides.
- Decide if you need the right or left drain configuration.
- Verify your faucet and drain hardware are compatible with this model.
- Check that your wall framing supports the above-floor installation method.
The product at a glance
American Standard Studio 60x30 Alcove Tub
Best for: Standard alcove bathroom renovations
- Type
- Bathtub
- Length
- 60 inches
- Mount Type
- Above floor rough installation
- Color
- White
- Size
- 60"X30"
- Dimensions
- 60 × 30 × 18 inches
View on Amazon: American Standard Studio 60x30 Alcove Tub Affiliate link
This American Standard Studio bathtub measures 60 by 30 inches with an 18-inch height. It features a high-gloss acrylic shell reinforced with fiberglass for durability. The integral apron offers a clean look, while the three-sided flange helps prevent water seepage. It includes lumbar support for comfort. This above-floor rough-in model weighs 76 pounds and suits standard bathroom layouts.
Pros
- High-gloss acrylic with fiberglass reinforcement
- Integral three-sided tiling flange
- Pre-leveled tub bottom
- Integral lumbar support
Cons
- Above floor rough installation requires framing
- Fixed 18-inch height limits deep soaking
- No included faucet or drain hardware
Good fit if
- You need a standard 60-inch alcove tub
- You want a minimalist white acrylic finish
- You are installing an above-floor rough-in
Skip if
- You require a drop-in or freestanding tub
- You need a deeper soaking capacity
- You prefer a built-in apron with complex curves
Verdict: American Standard Studio 60x30 Acrylic Tub provides a durable, standard-sized option for alcove installations. It fits buyers who prioritize a clean, white acrylic shell with basic comfort features over deep soaking or complex designs.
Specifications side by side
| Spec | American Standard Studio 60x30 Alcove Tub |
|---|---|
| Type | Bathtub |
| Length | 60 inches |
| Mount Type | Above floor rough installation |
| Color | White |
| Size | 60"X30" |
| Dimensions | 60 × 30 × 18 inches |
| Weight | 76 pounds |
| Model | 2573102.02 |
Frequently asked questions
Is the American Standard Studio tub a left-hand or right-hand drain?
The product listing does not specify the drain orientation. You should check the installation manual or contact the manufacturer directly to confirm whether the drain is positioned for a left-hand or right-hand setup. This detail is critical for planning your plumbing connections before installation begins.
What is the exact depth of the American Standard Studio tub?
The tub has a height of 18 inches. This measurement refers to the vertical depth of the tub shell. It provides a standard soaking depth suitable for most adults. This dimension is part of the overall 60x30-inch footprint designed for standard alcove bathrooms.
How much does the American Standard Studio tub weigh?
The tub weighs 76 pounds. This weight reflects the acrylic shell and fiberglass reinforcement. You need to ensure your floor structure can support this load. The weight also helps keep the tub stable during use, reducing movement when filled with water.
Can the American Standard Studio tub be installed in a corner?
No, this model is designed for alcove installation. It is a three-sided tub meant to be recessed into a framed enclosure. It is not shaped for corner placement. You will need to build walls around three sides to properly support and surround the tub.
Does the American Standard Studio tub include a drain?
The product data does not mention a drain being included. You will likely need to purchase a drain assembly separately. Standard alcove tubs often require separate drain and overflow kits. Verify what is in the box before you start your installation project.
Is the American Standard Studio tub suitable for deep soaking?
The 18-inch height suggests a standard soaking depth rather than a deep soak design. It is optimized for standard bathroom renovations. If you prefer a deeper water level, you might look for models with greater height. This tub prioritizes a clean, standard fit.
What material is the American Standard Studio tub made of?
The tub is constructed from high-gloss acrylic with fiberglass reinforcement. This combination creates a smooth, white surface that is easy to clean. The fiberglass backing adds strength to the acrylic shell. This material choice helps resist chipping and maintains a bright appearance over time.