American Standard Town Square S 60"x32" Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This american standard town square s 60 x32 review focuses on a standard alcove tub designed for left-side drainage. The unit measures sixty inches in length and thirty-two inches in width, providing a familiar footprint for most bathrooms. It sits at a height of twenty inches, offering a comfortable entry level. The model features a white finish and a recessed mounting type. These dimensions and the left drain location define its spatial requirements. You need to verify your wall cutout matches these exact measurements before purchasing to ensure a proper fit during installation.
What stands out
- Integral 3-sided one-inch tiling and water retention flange simplifies the installation process
- Sloped lumbar support is built into the tub bottom for added comfort
- Pre-leveled tub bottom reduces the effort needed during setup
- Limited lifetime warranty provides long-term coverage for the product
Who it fits
Good fit for
This tub suits homeowners planning a recessed installation in a standard alcove. The left drain placement is ideal for bathrooms where plumbing lines are positioned on the left wall. You will appreciate the integral apron and clean traditional styling if you want a cohesive look. It also fits well if you are remodeling with other Town Square S fixtures, as the suite coordinates easily. The pre-leveled bottom helps DIYers who want a straightforward installation without complex leveling adjustments.
Who should skip it
Skip this option if your bathroom requires a right-side drain, as this model is fixed to the left. You should also avoid it if you need a freestanding or drop-in tub, since it is designed strictly for recessed installation. The sixty by thirty-two inch footprint may not fit smaller or uniquely shaped alcoves. Additionally, if you prefer a deeper soaking experience, the twenty-inch height is standard and not deep. The white color is fixed, so you cannot choose alternative finishes for this specific model.
Verdict: The American Standard Town Square S is a practical choice for standard left-drain alcove installations. Its integrated flange and pre-leveled base make it a sensible option for straightforward bathroom remodels.
Key specs explained for this tub
Length: 60 inches
This is the standard length for alcove bathtubs. You get enough room to stretch out without taking up excessive floor space. It fits most standard bathroom layouts. If you need more legroom, look for longer models, but this size is the common choice for most homes.
Width: 32 inches
The width determines how much space you have to move inside the tub. Thirty-two inches is a comfortable width for most adults. It allows for gentle side-to-side movement. Narrower tubs feel cramped. This width balances comfort with efficient use of bathroom floor area for typical alcove installations.
Height: 20 inches
This is the vertical depth from the floor to the rim. A twenty-inch height is standard for ease of entry and exit. It is not too high to climb over, nor too low to strain your back. Check this spec if you have mobility issues, as lower tubs are easier to step into.
Mount Type: recessed
This means the tub is designed to fit into a framed wall opening, known as an alcove. You need three walls to surround it. This style saves space compared to freestanding tubs. Ensure your bathroom has the correct wall structure before buying. It is the most common installation type for standard bathrooms.
Drain Location: left
The drain is positioned on the left side when you are facing the tub. This determines where the plumbing connects in your wall. If your existing plumbing is on the right, this tub will not fit without major renovation. Always check your current drain position before purchasing to avoid installation problems.
Design and build details
According to the listing, this American Standard Town Square S tub features an integral apron with clean, traditional styling. The exterior is finished in white. This color choice helps the unit blend into standard bathroom decors without drawing excessive attention. The design is intended for recessed installation, meaning it fits into a three-wall alcove. You must account for the sixty-inch length and thirty-two-inch width when planning your space. The height is twenty inches, which is typical for built-in soaking tubs.
The drainage system is positioned on the left side. This layout determines how you connect your plumbing and position the tub within the alcove. If your existing pipes are on the right, this model will not work without significant modification. The listing notes a one-inch tiling and water retention flange on three sides. This feature allows you to tile directly against the tub edge, creating a seamless look while preventing water damage behind the unit.
Installation is supported by a pre-leveled tub bottom. This specification suggests that the base is manufactured to sit flat on standard subflooring, reducing the need for extensive shimming during setup. The sloped lumbar support is built into the basin shape. This curve is designed to provide back comfort while you soak. The model number is 2544202.02. These build details indicate a focus on straightforward installation and traditional aesthetics.
Setup and everyday use details
Installation requires a recessed setup. The listing specifies this is for alcove mounting, meaning it fits between three walls. You need a left-side drain location for the plumbing connection. The unit includes an integral three-sided tiling flange. This one-inch feature helps retain water and simplifies the tiling process around the tub's edges. A pre-leveled bottom is also included. This design choice aims to make the initial leveling process easier during installation. You do not need to adjust the tub's base as much. The tub coordinates with the Town Square S bathroom suite. If you are remodeling, matching fixtures from this line can streamline the project. Daily use involves sitting in a white acrylic shell. The interior features a sloped lumbar support. This curve is designed to provide more comfort for your lower back while you soak. The integral apron offers clean, traditional styling. It presents a solid front that hides the plumbing and framing. You wipe the white surface to maintain its appearance. The limited lifetime warranty covers the material against defects. This provides long-term assurance for your investment. The sixty-inch length allows you to stretch out. The thirty-two-inch width offers standard bathing space. The twenty-inch height is typical for this category. You access the tub by stepping over the side wall. The left drain placement determines where your plumbing pipes must connect. Ensure your bathroom layout accommodates this specific requirement before purchase.
Before You Buy This Tub
This tub is a standard alcove model. It fits into a three-wall recess. You must confirm your drain is on the left. The listing notes it coordinates with the Town Square S suite. If you plan a full remodel, check if other fixtures match this line. The integral flange simplifies tiling. You still need proper waterproofing behind the walls. Cleaning requires mild soap. Avoid abrasive pads to protect the white finish. This unit is one of 1 options in our guide. It suits buyers who want a traditional look. Those seeking deep soaking or right-side drains should skip it. Verify your bathroom dimensions first. The sixty-inch length is standard. The thirty-two-inch width is typical for alcove spaces. Ensure your floor can support the weight when filled. This is a practical choice for standard layouts.
Check before you buy
- Confirm left-side drain location matches your plumbing
- Check if Town Square S fixtures match your style
- Verify bathroom recess is exactly 60 by 32 inches
- Ensure floor supports filled tub weight
The product at a glance
American Standard Town Square S 60x32 Left Drain
Best for: Traditional recessed installations with left drain needs
- Length
- 60 inches
- Drain Location
- left
- Mount Type
- recessed
- Color
- White
- Dimensions
- 60 × 32 × 20 inches
View on Amazon: American Standard Town Square S 60x32 Left Drain Affiliate link
The American Standard Town Square S is a 60-inch by 32-inch recessed soaking tub. It features a left-side drain and a 20-inch height. The design includes a sloped lumbar support for comfort. An integral apron provides traditional styling. This white tub is built for recessed installation. It suits those seeking a standard-sized, durable option for a complete bathroom remodel.
Pros
- Integral 3-sided 1-inch tiling flange for easy installation
- Sloped lumbar support for a more comfortable bathing experience
- Pre-leveled tub bottom simplifies the installation process
- Coordinates with the Town Square S bathroom suite
Cons
- Limited Lifetime Warranty is not a full lifetime warranty
- Recessed mount type requires specific framing and installation
- Left drain location may not fit all plumbing layouts
Good fit if
- You need a standard 60-inch tub for a recessed setup
- You prefer a traditional apron style with clean lines
- You are remodeling with a matching Town Square S suite
Skip if
- You require a right-side drain configuration
- You are installing a freestanding or alcove tub
- You need a full lifetime warranty coverage
Verdict: American Standard Town Square S 60x32 Bathtub fits homeowners who want a reliable, traditional recessed tub with lumbar support. It is a solid choice for standard bathroom layouts needing a left drain.
Specifications side by side
| Spec | American Standard Town Square S 60x32 Left Drain |
|---|---|
| Length | 60 inches |
| Drain Location | left |
| Mount Type | recessed |
| Color | White |
| Dimensions | 60 × 32 × 20 inches |
| Model | 2544202.02 |
Frequently asked questions
Does this tub have a left or right drain?
This specific model features a left-side drain. You must verify your bathroom plumbing aligns with this orientation before purchasing. The listing identifies it as the left drain variant. If your existing plumbing is on the right, you will need a different model or significant plumbing adjustments to fit this unit correctly.
What are the exact dimensions of the American Standard Town Square S?
The tub measures sixty inches in length, thirty-two inches in width, and twenty inches in height. These dimensions match the standard alcove footprint found in most bathrooms. The six-foot length provides ample space for soaking, while the width and height accommodate standard framing and wall spaces.
Is this bathtub suitable for a recessed installation?
Yes, this unit is designed for recessed installations. It is an alcove tub meant to fit between three walls. The listing specifies it includes a one-inch tiling flange for secure attachment to the surrounding walls. This setup ensures a stable and watertight fit within standard bathroom framing.
What is the color and finish of this tub?
The bathtub features a white color and finish. This neutral tone is standard for bathroom fixtures and helps the unit blend into most existing decors. The integral apron shares this white finish, providing a clean and traditional look that matches common tile and vanity selections.
Does this tub include lumbar support features?
The product is described as offering lumbar support. This design element aims to provide comfort during soaking by supporting the lower back. The ergonomic shape works with the standard dimensions to enhance usability. You get a traditional look combined with functional support for longer baths.
Can this tub be used in a standard three-wall alcove?
Yes, it is built for standard three-wall alcove setups. The integral apron and tiling flange are designed to interface with three surrounding walls. This makes it a straightforward choice for new construction or remodels where the tub fits into a framed niche. You do not need a freestanding base.