Kingston Brass Aqua Eden VTAP663222R 66-Inch Review: Specs, Pros and Cons

What stands out

• 66-inch length provides ample space for most adults
• 14-5/16 inch soaking depth offers deep water coverage
• 62.17 gallon capacity holds a significant volume of water
• Acrylic construction with fiberglass and resin reinforcement ensures durability
• Right-handed drain placement fits standard right-side plumbing layouts

Who it fits

Key Specs Explained for Aqua Eden

Material: Acrylic

Acrylic is a smooth, non-porous plastic that resists staining and chipping better than older materials. This surface is easy to clean with mild soap. The fiberglass and resin reinforcement adds structural strength without adding excessive weight. You get a glossy white finish that stays bright. This material choice suits buyers who want a durable, low-maintenance tub for daily use in a standard bathroom.

Length: 66 inches

A 66-inch length is the standard size for most alcove tubs. This dimension fits typical bathroom layouts where space is limited. It provides enough room for most adults to stretch out comfortably. If your bathroom opening is exactly 66 inches wide, this tub will slot in perfectly. It is the most common size, making replacement or new installation straightforward for standard homes.

Soaking Depth: 14-5/16 inches

This depth measures the water level from the bottom to the overflow. It offers moderate coverage for your body. You will feel submerged enough for a relaxing soak without the tub being too deep to climb in and out of safely. This is practical for most users. Compare this to deep soaking tubs if you prefer full immersion, but this depth is ideal for standard alcove models.

Water Capacity: 62.17 gallons

This capacity tells you how much water the tub holds when filled to the overflow. It determines how long the water stays warm and how much hot water your heater needs to replenish. A 62-gallon volume is typical for this size. It ensures you have enough water to cover your body comfortably. This spec helps you plan your plumbing and heating requirements for efficient filling.

Drain Location: Right-handed

Right-handed drain placement means the drain is on the right side when you face the tub. This matches standard plumbing configurations in many homes. You must check your existing drain location before buying. If your plumbing is on the left, this tub will not fit without major renovation. This spec is critical for ensuring the tub aligns with your bathroom's existing infrastructure.

Design and Build Details

According to the listing, the Aqua Eden VTAP663222R is constructed from acrylic with fiberglass and resin reinforcement. This combination creates a smooth, non-porous surface that resists staining and chipping. The material choice keeps the unit manageable. The tub weighs 68.4 pounds, which is moderate for its size. This weight suggests you will need proper floor support during installation, but it is not excessively heavy for handling.

The overall dimensions are 66 inches in length, 32 inches in width, and 20-1/2 inches in height. This is a three-wall alcove design, meaning it is intended to be installed against three walls. The apron is finished in a glossy white on all exposed sides. This layout is standard for most bathrooms, allowing you to fit the tub into a typical alcove space without custom framing. The right-handed drain placement is fixed, so you must plan your plumbing accordingly.

Soaking depth reaches 14-5/16 inches to the overflow. The total water capacity is 62.17 gallons. This depth provides a comfortable soak for most users. The wall-mount tub filler ready feature indicates where your plumbing fixtures will connect. You will need to purchase the faucet and drain separately. The design is functional and straightforward, focusing on standard dimensions and durable materials for everyday use.

Setup and Everyday Use

This tub is designed for a standard three-wall alcove installation. You will need a framing structure that supports the 66-inch length and 32-inch width. The unit weighs 68.4 pounds, which is manageable for most installers but requires proper wall support. The listing notes it is wall mount tub filler ready. This means you must plan your plumbing before the tub is set in place. The right-handed drain placement dictates where your drain assembly will connect. Ensure your rough-in plumbing aligns with this specific side. Once installed, the glossy white finish remains consistent on all exposed sides. This uniform look simplifies cleaning. You can wipe the surface with mild soap without worrying about damaging the acrylic. The water depth reaches 14-5/16 inches to the overflow. This soaking depth allows for comfortable immersion. The total capacity is 62.17 gallons. Filling the tub to this level requires a standard household water heater and supply lines. The 20-1/2 inch height fits within typical bathroom ceiling clearances. The acrylic construction retains heat better than cast iron, though it is lighter. This material choice makes daily maintenance straightforward. You do not need special cleaners. Just rinse and dry. The right-hand drain is standard for most bathroom layouts. This reduces the need for custom plumbing modifications. The alcove design hides three sides. You only need to finish the front apron and the three surrounding walls. This setup keeps the installation process efficient. The tub integrates seamlessly into existing bathroom renovations. You get a clean, white look that matches most fixtures. The specifications ensure it fits standard bathroom footprints. No custom cutting is required for the tub itself. Just verify your wall space matches the 66 by 32 inch dimensions.

Check Compatibility And Setup Needs

Before you finalize your selection, verify your bathroom layout matches the 66 by 32 inch footprint. This alcove model requires three surrounding walls for proper support. You must confirm that your plumbing aligns with the right-handed drain placement. The listing notes it is wall-mount tub filler ready, so you need to install the faucet and hardware separately. Check your existing fixtures for compatibility before purchasing. Upkeep is straightforward due to the glossy white acrylic surface. Use mild soap and water for cleaning. Avoid abrasive pads that could scratch the finish. The fiberglass and resin reinforcement helps maintain structural integrity over time. This tub offers a standard soaking depth of 14-5/16 inches. It fits well in compact bathrooms where space is limited. Compare its 62.17 gallon capacity against larger soaking tubs if you prefer deeper immersion. Ensure your floor can support the 68.4 pound weight when filled. This option suits those seeking a practical, no-frills solution for daily use.

Check before you buy

• Verify three-wall alcove space is available for installation
• Confirm right-handed drain aligns with your plumbing
• Plan for separate wall-mount faucet and hardware purchase
• Ensure floor structure supports filled tub weight

The product at a glance

1

Kingston Brass Aqua Eden 66" Alcove Tub

Best for: Standard alcove bathrooms with right drain needs

Type

alcove

Material

acrylic

Length

66 inches

Drain Location

right-hand

Water Capacity

62.17 gallons

Soaking Depth

14-5/16 inches

View on Amazon: Kingston Brass Aqua Eden 66" Alcove Tub Affiliate link

This 66-inch acrylic alcove tub offers a 62.17-gallon capacity for comfortable soaking. The right-handed drain and 14-5/16-inch water depth suit standard three-wall installations. Weighing 68.4 pounds, it provides a stable base. The glossy white finish matches most bathroom decor. It is designed for wall-mount fillers, giving you flexibility in fixture selection.

Pros

• 62.17-gallon water capacity for deep soaking
• 14-5/16-inch water depth to overflow
• Right-handed drain placement
• Acrylic construction with fiberglass reinforcement
• Glossy white finish on all exposed sides

Cons

• 66-inch length may not fit smaller alcoves
• Requires wall-mount filler installation
• Fixed right-handed drain limits layout options

Good fit if

• You need a standard 66-inch alcove tub
• You prefer a right-handed drain configuration
• You plan to install a wall-mount filler

Skip if

• You require a left-handed drain placement
• You need a freestanding or corner tub
• You want a built-in faucet and drain assembly

Verdict: Kingston Brass Aqua Eden 66-Inch Alcove Tub fits bathrooms with standard three-wall layouts and right-side drain needs. It provides ample soaking depth for users prioritizing capacity over compact sizing.

Specifications side by side

Frequently asked questions

See also

• kingston brass aqua eden vtap663222r 66 inch alternatives
• best kingston brass bathtubs under 1000
• kingston brass ks3101al pot filler review
• luvisona 66 inch bathroom vanity review