Kingston Brass Wall Mount Chrome Tub Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This kingston brass kingston ks266c wall mount review covers a polished chrome tub filler designed for clawfoot tubs. It features solid brass construction and a drip-free ceramic disc cartridge. The unit mounts to the wall with a 6-inch centerset spread. You get a 7-inch spout reach and a flow rate of 7.0 GPM at 80 PSI. It also includes a hand shower with a 59-inch hose. Dual cross handles allow for easy rotation. The finish resists corrosion. This setup is built for durability and straightforward operation in a bathroom setting.
What stands out
- Solid brass construction for long-term durability
- Drip-free ceramic disc cartridge prevents leaks
- Includes a hand shower with a 59-inch hose
- 7.0 GPM flow rate at 80 PSI
- Corrosion-resistant polished chrome finish
Who it fits
Good fit for
This faucet suits homeowners installing a clawfoot tub with existing wall plumbing. The wall-mount design and 6-inch adjustable center fit standard two-hole setups. The included hand shower adds flexibility for rinsing or filling buckets. The solid brass body and ceramic cartridge appeal to those seeking low maintenance. You will appreciate the dual cross handles if you prefer tactile control over electronic interfaces. The corrosion-resistant finish works well in humid bathroom environments.
Who should skip it
You should look elsewhere if you need a deck-mount fixture. This unit requires wall installation, so it does not fit tubs with deck-mounted faucet holes. The 7.0 GPM flow rate may be too high for regions with strict water conservation codes. If you prefer a single-handle mixer for quick temperature adjustments, the dual cross handles may feel less convenient. The lack of a built-in diverter means you must manage hand shower switching manually. Buyers wanting a integrated shower system might find this incomplete.
Verdict: The Kingston Brass KS266C is a sturdy, spec-driven choice for wall-mounted clawfoot tubs. It delivers reliable performance through solid brass construction and included accessories.
Key specs explained for this tub
Flow Rate: 7.0 GPM
This faucet delivers seven gallons of water per minute at standard pressure. You will fill a deep soaking tub faster than with low-flow models. This rate meets common plumbing codes for new installations. If you prefer a gentle, slow fill for relaxation, this may feel brisk. Compare this figure to other tub fillers to ensure your water heater can handle the demand without dropping temperature.
Mount Type: Wall mount
This unit attaches directly to your bathroom wall rather than sitting on the tub deck. You save valuable rim space on your clawfoot tub. This style offers a clean, uncluttered look that suits vintage designs. Installation requires precise plumbing rough-ins behind the wall. You must ensure your wall structure can support the weight and that pipes are aligned correctly before buying.
Construction Material: brass
The internal body is made from solid brass, not plastic or zinc. This material resists corrosion and handles high water pressure better than cheaper alloys. You get a heavier, more durable fixture that lasts longer. The polished chrome finish protects against tarnishing. When shopping, look for solid brass cores to avoid leaks or cracks that often plague lightweight composite faucets.
Center Set Spread: 6 in
The distance between the two handle mounting holes is six inches. You need a wall space wide enough to accommodate this spread. This is a standard centerset configuration for many vintage-style faucets. If your existing plumbing holes are spaced differently, this unit will not fit. Measure your wall carefully before purchasing to ensure the holes align with your water supply lines.
Design and Build Details
The listing specifies solid brass construction for the Kingston KS266C. This material choice suggests durability and resistance to corrosion, which is practical for humid bathroom environments. The polished chrome finish is listed as corrosion-resistant, meaning it should maintain its appearance with regular cleaning. You have nine finish options available, including brushed nickel and matte black, allowing you to match existing hardware. The faucet weighs 7.13 pounds, indicating a substantial build that feels secure once installed.
According to the listing, the unit features a 6-inch adjustable center spread for two-hole wall mounting. This layout requires precise hole spacing in your wall, so you must verify your plumbing rough-in before purchase. The spout reaches 7 inches, providing adequate clearance for most clawfoot tubs. Dual cross handles offer a traditional aesthetic and allow easy rotation for temperature and flow control. The width measures 9.1 inches, and the height is 6 inches, fitting standard wall spaces without protruding excessively.
The package includes a hand shower with a 59-inch hose, adding versatility for rinsing or cleaning the tub. This feature does not alter the core design but expands functionality. The ceramic disc cartridge is drip-free, which helps prevent leaks over time. You should ensure your wall can support the weight and that your plumbing matches the 6-inch centerset requirement. This design suits those prioritizing classic style and solid materials over modern minimalist fixtures.
Setup and everyday use guide
Installation requires a wall mount configuration with a 6-inch centerset spread. You need two holes in your wall for the dual cross handles. The adjustable center allows for slight alignment variations during fitting. The unit weighs 7.13 pounds, so ensure your wall framing can support the load. You must connect standard plumbing lines to the inlet ports. The 7-inch spout reach positions water directly over the tub basin. This reach is suitable for standard clawfoot tubs. Daily operation relies on rotating the dual cross handles. This mechanism controls water flow and temperature. The ceramic disc cartridge is drip-free, which reduces wear over time. You will experience a water flow rate of 7.0 GPM at 80 PSI. This volume fills deep soaking tubs efficiently. The finish is polished chrome and listed as corrosion-resistant. You should clean it with a soft cloth to maintain its appearance. Avoid abrasive cleaners that might scratch the surface. The kit includes a hand shower with a 59-inch hose. You can use this for rinsing or cleaning the tub interior. The hose length provides flexibility for reaching different areas. The solid brass construction suggests long-term durability in humid environments. You do not need batteries or external power sources. The system operates entirely on water pressure. This simplicity reduces potential points of failure. The design is straightforward, focusing on mechanical reliability. You get a functional fixture that integrates with traditional bathroom plumbing standards.
Before You Buy This Filler
This Kingston Brass model is a dedicated clawfoot tub filler. It does not include a shower kit, so you must purchase a separate hand shower if you want one. The listing notes a 59-inch hose is included, but verify your existing shower head compatibility before installing. You need to check your wall plumbing rough-in. The 6-inch centerset spread is standard, but exact hole spacing must match your pre-drilled holes. Upkeep is simple. The polished chrome finish resists corrosion, but you should wipe it dry after use to prevent water spots. This unit fits alongside other wall-mount options in our guide. Unlike deck-mounted faucets, it saves floor space. Unlike freestanding units, it requires specific wall reinforcement. If you have a vintage clawfoot tub, this style complements the classic look. Ensure your water pressure supports the 7.0 GPM flow rate for optimal performance. This choice suits those prioritizing traditional aesthetics and solid brass durability over modern electronic features.
Check before you buy
- Verify your wall has two pre-drilled holes spaced exactly 6 inches apart.
- Confirm you have the plumbing rough-in for a wall-mounted installation.
- Check if you need to buy a separate hand shower head.
- Ensure your water pressure supports the 7.0 GPM flow rate.
The product at a glance
Kingston Brass Wall Mount Chrome Tub Filler
Best for: clawfoot tubs needing wall-mount fixtures
- Mount Type
- Wall mount
- Construction Material
- brass
- Flow Rate
- 7.0 GPM
- Handle Type
- Dual Cross Handles
- Center Set Spread
- 6 in
- Dimensions
- 7.2 × 9.1 × 6 inches
View on Amazon: Kingston Brass Wall Mount Chrome Tub Filler Affiliate link
This is a wall-mount clawfoot tub faucet with a polished chrome finish. It features solid brass construction and a drip-free ceramic disc cartridge. The dual cross handles allow for easy rotation. It includes a hand shower with a 59-inch hose. The flow rate is 7.0 GPM at 80 PSI. The spout reach is 7 inches. It suits you if you want a durable, classic-style fixture for your soaking tub.
Pros
- Solid brass construction for durability
- Includes hand shower with 59-inch hose
- Drip-free ceramic disc cartridge
- Corrosion-resistant polished chrome finish
Cons
- Wall mount requires professional installation
- 7.0 GPM flow rate may be higher than water-saving standards
- Fixed 7-inch spout reach limits placement flexibility
Good fit if
- You need a durable brass faucet for a clawfoot tub
- You want a hand shower included in the package
- You prefer a classic cross-handle design
Skip if
- You prefer a deck-mount installation
- You want a low-flow water-saving design
- You need a handheld wand without a fixed hose
Verdict: Kingston Brass KS266C Wall Mount Tub Faucet is a solid choice for clawfoot tubs requiring wall-mounted fixtures. It fits you well if you prioritize brass durability and included shower accessories.
Specifications side by side
| Spec | Kingston Brass Wall Mount Chrome Tub Filler |
|---|---|
| Mount Type | Wall mount |
| Construction Material | brass |
| Flow Rate | 7.0 GPM |
| Handle Type | Dual Cross Handles |
| Center Set Spread | 6 in |
| Type | Clawfoot Tub |
| Dimensions | 7.2 × 9.1 × 6 inches |
| Weight | 7.13 pounds |
| Size | 6-Inch Adjustable Center |
| Color | Polished Chrome |
| Model | KS266C |
Frequently asked questions
Does the Kingston Brass KS266C come with a shower head?
No, the listing does not include a shower head. It provides a 59-inch hose, but you must purchase a compatible hand shower separately. This model is designed as a dedicated tub filler. You need to verify that any additional shower kit you buy fits the included hose length and connector type.
How wide is the Kingston Brass wall mount faucet?
The unit is 9.1 inches wide. This width accommodates the dual cross handles and the central spout. The total spread between the handles is adjustable up to 6 inches. This flexibility helps you align the fixture correctly on your wall studs during installation.
Is the Kingston Brass KS266C suitable for a freestanding tub?
Yes, it is specifically designed for clawfoot tubs. The wall-mount configuration allows it to work with freestanding units that do not have deck-mounted fixtures. You can mount it on the wall behind the tub. This keeps the tub deck clear for a cleaner look.
What is the weight of the Kingston Brass tub filler?
The faucet weighs 7.13 pounds. This substantial weight suggests solid internal components. You should ensure your wall mounting hardware can support this load. The weight contributes to the durability and stability of the unit during daily use.
Can I adjust the distance between the handles on this faucet?
Yes, the center spread is adjustable. The listing specifies a 6-inch adjustable center. This feature allows for minor variations in wall hole spacing. You can fine-tune the alignment during installation to ensure a proper fit without forcing the connections.
What finish does the Kingston Brass KS266C have?
It features a polished chrome finish. This coating is listed as corrosion-resistant. It helps maintain the faucet's appearance in humid bathroom environments. You can clean it with standard chrome cleaners to keep the surface bright and free from water spots.
How many holes are needed for installation?
You need two holes in the wall for the dual cross handles. The spout mounts centrally between them. The 6-inch centerset spread defines the distance between the handle mounts. Ensure your wall has the correct spacing or use the adjustable feature to accommodate slight differences.