Kingston Brass Kingston VTAM6032L22S 2-Wall Corner Review (2026): A Spec-Based Look

What stands out

• 60-inch length provides ample space for most adults.
• 14-3/16-inch water depth offers a comfortable soak.
• 64.3-gallon capacity holds enough water for relaxation.
• Left-handed drain placement suits specific plumbing layouts.
• Acrylic construction allows for easy repair and cleaning.

Who it fits

Key specs for this tub

Material: Acrylic

Acrylic is a durable plastic that resists chips and stains. You can repair minor scratches with a kit. This material holds heat better than cast iron, keeping your bath warm longer. It is lighter than stone or metal, making installation easier for most DIYers. If you want a glossy white finish that is easy to clean, acrylic is a practical choice for standard bathrooms.

Soaking Depth: 14-3/16"

This depth measures the water level up to the overflow. A 14-3/16-inch depth allows you to submerge most of your torso while sitting. It offers a balance between comfort and water conservation. Deeper tubs may feel more luxurious but require more water. If you prefer a moderate soak that still covers your shoulders, this depth is suitable for everyday relaxation without excessive water usage.

Water Capacity: 64.3 gallon

This capacity indicates the total volume of water the tub holds. At 64.3 gallons, it requires a significant amount of water to fill. This ensures a deep soak but may increase your water bill slightly. It also adds weight to the tub when full. When comparing tubs, check this spec to estimate filling time and water costs. It is standard for a 60-inch alcove model.

Drain Location: Left-handed

Left-handed drain placement means the drain is on the left side when you stand facing the tub. This matters for your plumbing layout. You must ensure your drain pipe aligns with this position. If your existing plumbing is on the right, you may need to move pipes or use an offset drain kit. Always check this spec before buying to avoid costly plumbing modifications during installation.

Design and build details

The listing describes this tub as an alcove model with an apron. It is built from acrylic, which the manufacturer notes is durable and easy to repair. The exterior is finished in glossy white on all exposed sides. This finish resists stains and keeps the surface clean with minimal effort. You will find the drain placed on the left side. This left-handed layout requires you to plan your plumbing and wall space accordingly before installation.

The overall dimensions are 60 inches long, 32 inches wide, and 21-5/8 inches high. According to the listing, the unit weighs 101 pounds. This weight is manageable for two people but requires a sturdy floor. The soaking depth reaches 14-3/16 inches to the overflow. This depth provides a moderate soak without requiring excessive water volume. The total water capacity is 64.3 gallons. This volume fills the tub to a comfortable level for most users.

This tub is designed for wall-mount fillers. You will need to install separate faucet hardware. The alcove style fits into a three-wall enclosure. It is not a freestanding unit. The glossy white finish matches standard bathroom fixtures. The acrylic construction ensures it is lighter than cast iron alternatives. This makes installation easier while maintaining a solid feel during use.

Installation and daily operation

This 60-inch alcove tub requires a standard three-wall alcove installation. The listing specifies a left-handed drain placement, so you must position the unit so the drain aligns with the left side of the opening. The overall dimensions are 60 inches in length, 32 inches in width, and 21-5/8 inches in height. You need to ensure your framing matches these measurements precisely. The tub weighs 101 pounds, which is manageable for two people but requires careful handling during placement. It is wall-mount tub filler ready, meaning you will install the faucet and hardware on the surrounding walls rather than the tub itself. This setup is typical for alcove models with an apron.

For daily use, the glossy white acrylic finish resists stains and chips, making cleaning straightforward with mild soap and water. The 64.3-gallon water capacity allows for a full soak without overfilling. The soaking depth reaches 14-3/16 inches to the overflow, providing adequate coverage for most adults. Acrylic holds heat well, so your bath stays warm longer than it would in metal or stone. The apron design conceals the plumbing and framing, giving the bathroom a clean look. You simply fill the tub, soak, and drain. The left-handed drain ensures water exits efficiently from the specified corner. This model suits those who want a durable, easy-to-maintain tub for standard bathroom layouts.

Check these specs first

Before you buy, verify your bathroom layout matches the 60 by 32 inch footprint. This unit requires a standard three-wall alcove setup. You must confirm the left-handed drain aligns with your plumbing. The listing notes it is wall-mount tub filler ready. You will need to purchase the faucet and drain hardware separately. Acrylic surfaces resist chips but require gentle cleaning. Avoid abrasive pads to maintain the glossy white finish. Minor scratches can be repaired with a standard kit. This model fits alongside other standard alcove tubs in its size class. It offers a practical soak depth of 14-3/16 inches to the overflow. If you need a corner-specific design, this might not be the right fit. Check your water heater capacity for the 64.3-gallon fill volume. Ensure your floor can support the 101-pound weight when full. Plan your tile work around the apron edge.

Check before you buy

• Confirm left-handed drain alignment with your plumbing.
• Verify three-wall alcove space is 60 by 32 inches.
• Buy separate wall-mount faucet and drain hardware.
• Check floor load capacity for 101-pound weight.
• Ensure water heater handles 64.3-gallon fill volume.

The product at a glance

1

Kingston Brass 60-Inch Left-Hand Alcove Tub

Best for: Standard alcove bathrooms needing left-drain setup

Type

Alcove tub with apron

Material

Acrylic

Length

60 inches

Drain Location

Left-handed

Water Capacity

64.3 gallon

Soaking Depth

14-3/16"

View on Amazon: Kingston Brass 60-Inch Left-Hand Alcove Tub Affiliate link

This 60-inch alcove tub is built from acrylic for durability and easy repair. It measures 32 inches wide and 21-5/8 inches high, fitting standard bathroom layouts. The 64.3-gallon capacity offers ample space, with a soaking depth of 14-3/16 inches to the overflow. It features a glossy white finish and a left-handed drain, making it a practical option for standard installations.

Pros

• Acrylic construction for durability
• 64.3-gallon water capacity
• 14-3/16-inch soaking depth
• Left-handed drain placement

Cons

• Heavier build at 101 pounds
• Standard alcove design limits placement options
• No included wall-mount filler hardware

Good fit if

• You need a standard 60-inch alcove tub
• You prefer a left-handed drain configuration
• You want acrylic material for easy maintenance

Skip if

• You require a corner soaking tub
• You need a freestanding unit
• You prefer a smaller footprint under 60 inches

Verdict: Kingston Brass 60-Inch Acrylic Alcove Tub is a solid choice for standard bathrooms needing a durable, left-drain setup. It fits well if you prioritize acrylic longevity and standard alcove dimensions over unique shapes.

Specifications side by side

Frequently asked questions

See also

• kingston brass kingston vtam6032l22s 2 wall corner alternatives
• best kingston brass bathtubs under 1000
• kingston brass ks8107dl wall mount pot review
• allicaver 2 pack metal wall review