Kingston Brass VTDE603122R 60-Inch Contemporary Alcove Acrylic Bathtub Review: Specs, Pros and Cons

What stands out

• 60-inch length provides ample space for reclining
• 14-inch soaking depth offers comfortable immersion
• Acrylic construction with fiberglass reinforcement ensures durability
• Right-hand drain configuration suits specific plumbing layouts
• Integral tub apron simplifies installation with tile flange

Who it fits

Key specs explained for this tub

Length: 60 inches

This length fits standard alcove spaces. You get enough room to stretch out your legs. It is the most common size for bathroom renovations. If your space is larger, you might look for a 72-inch model. If smaller, check 60-inch options carefully. This size balances comfort with footprint efficiency.

Water Capacity: 58.2 gallon

This capacity holds a moderate amount of water. It allows for a full soak without filling your tub to the brim. Larger soaking tubs often hold over 80 gallons. If you prefer deep immersion, compare this volume against deeper models. This level is suitable for most daily bathing routines.

Soaking Depth: 14 inches to overflow

This depth covers your torso when seated. It provides adequate submersion for relaxation. Shallower tubs may only reach your waist. Deeper tubs can submerge your shoulders. Check this measurement against your height. A 14-inch depth is standard for comfort in alcove styles.

Drain Location: Right hand

The drain sits on the right side when you face the tub. This determines your plumbing layout. You must align your drain pipe accordingly. If you need a left-hand drain, this model will not work. Always check this before purchase to avoid costly plumbing changes.

Mount Type: Three wall alcove

This tub installs against three walls. The fourth side remains open for access. It requires framing and tiling on the exposed side. This is the most common installation type. Freestanding tubs do not need this setup. Ensure your bathroom layout supports this three-wall configuration.

Design and Build Quality

According to the listing, this tub features an acrylic construction reinforced with fiberglass and resin. This combination provides a glossy white finish that is durable and easy to clean. The material choice ensures the surface remains smooth over time, resisting stains and chips better than bare fiberglass models. You benefit from a rigid shell that maintains its shape during use.

The unit weighs 95 pounds, which is substantial for an alcove model. This weight helps stabilize the tub when filled with water, reducing movement during bathing. Its dimensions are 60 inches in length and 30-11/16 inches in width. These standard measurements allow it to fit into most existing three-wall alcove spaces without requiring structural modifications. The height of 22-1/6 inches offers adequate clearance for plumbing beneath.

Installation relies on a tile flange and an integral tub apron. This design allows you to surround the back and sides with tile or wallboard, creating a seamless look. The drain is located on the right-hand side, which dictates your plumbing layout. You must position your drain kit accordingly, as it is not included. The overflow hole is integrated into the design, preventing spills while maintaining a clean aesthetic. This straightforward build suits bathrooms that prioritize function and classic styling.

Setup and Everyday Use Guide

Installing this alcove tub requires a standard three-wall enclosure. The unit includes a tile flange, which allows you to secure tiles directly to the side walls. This design creates a clean, integrated look without needing a separate apron. The tub also features an integral apron, meaning the front panel is part of the molded structure. You do not need to purchase a separate front panel for the initial installation. The listing notes that the drain kit is not included. You must source a compatible drain assembly separately to complete the plumbing setup. The right-hand drain location determines where your plumbing pipes will connect. Ensure your existing plumbing aligns with this configuration before starting work. The tub weighs 95 pounds. This weight is manageable for most installers but still requires proper floor support. Once installed, the 14-inch soaking depth provides adequate coverage for your body. The 58.2-gallon capacity holds enough water for a full soak. The acrylic surface is smooth and glossy white. This finish resists stains and is easy to wipe down after use. The material construction helps retain heat, keeping your bathwater warm longer. You simply fill the tub, add your soap, and relax. The straightforward design means there are no complex features to manage during your daily routine. It is a functional choice for standard bathrooms.

Before You Buy This Tub

This Kingston Brass model is a standard alcove tub, meaning it relies on three walls for support. You must verify your bathroom layout matches these dimensions: 60 inches long, 30-11/16 inches wide, and 22-1/6 inches high. The listing states the drain kit is not included. You will need to purchase a right-hand drain assembly separately. Ensure your plumbing aligns with the right-hand drain location specified. The acrylic surface requires gentle cleaning to maintain its glossy white finish. Avoid abrasive pads that might scratch the material. This tub offers a practical solution for tight spaces but lacks the deep soaking capacity of larger models. If you prioritize a compact footprint over maximum water volume, this fits your needs. Check your tile flange compatibility before installation. Confirm the overflow hole placement matches your existing plumbing. This straightforward design suits those seeking a reliable, no-frills bathing experience without complex features.

Check before you buy

• Verify your alcove space is 60 inches long and 30-11/16 inches wide.
• Purchase a compatible right-hand drain kit, as it is not included.
• Check that your plumbing aligns with the specified right-hand drain location.
• Confirm the overflow hole position matches your existing water lines.

The product at a glance

1

Kingston Brass 60-Inch Acrylic Alcove Tub

Best for: Standard alcove bathrooms needing right-hand drainage

Type

Alcove

Length

60 inches

Drain Location

Right hand

Water Capacity

58.2 gallon

Soaking Depth

14 inches to overflow

Mount Type

Three wall alcove

View on Amazon: Kingston Brass 60-Inch Acrylic Alcove Tub Affiliate link

This 60-inch alcove tub is built from acrylic reinforced with fiberglass and resin. It measures 30-11/16 inches wide and 22-1/6 inches high, offering a 58.2-gallon capacity. The soaking depth reaches 14 inches to the overflow. It features a right-hand drain and includes a tile flange for three-wall installation. You get a standard white finish that fits typical bathroom layouts.

Pros

• 60-inch length provides ample space for soaking
• 58.2-gallon water capacity holds a substantial volume
• 14-inch soaking depth to the overflow level
• Acrylic construction with fiberglass and resin reinforcement
• Includes a tile flange for seamless wall integration

Cons

• Drain kit is not included in the package
• Right-hand drain limits placement flexibility
• 95-pound weight requires sturdy floor support

Good fit if

• You need a standard 60-inch alcove tub
• You prefer a right-hand drain configuration
• You want a glossy white acrylic finish

Skip if

• You require a left-hand drain setup
• You are looking for a freestanding design
• You want a pre-installed drain kit

Verdict: Kingston Brass 60-inch Acrylic Alcove Tub offers a reliable 58.2-gallon capacity for standard bathrooms. It suits buyers who need a right-hand drain and a simple three-wall installation with a tile flange.

Specifications side by side

Frequently asked questions

See also

• kingston brass 60 inch acrylic alcove tub alternatives
• best kingston brass bathtubs under 1000
• best 60 Inch workbenches
• best kingston brass kitchen faucets