My PlumbingStuff Jumbo Clawfoot Shower Kit Review: Specs, Pros and Cons

What stands out

• 60-inch heavy aluminum D-style shower rod that can be cut for custom fit
• Patented B3100 diverter using ball-valve technology to prevent frequent damage
• 62-inch chrome-plated brass riser with 36-inch ceiling support
• Jumbo chrome-bell shower head included in the kit
• Includes 12 shower curtain rings for immediate use

Who it fits

Key specs explained for this kit

Size: Jumbo

The Jumbo designation indicates a larger-scale fixture compared to standard kits. This extra size accommodates taller users or those who prefer a more spacious shower area. You should verify that your clawfoot tub has sufficient clearance around the rim. A larger kit ensures the shower head reaches the floor comfortably without awkward bending. It also provides more room for the curtain to hang freely.

Width: 10 inches

This measurement refers to the footprint of the main components, such as the diverter or flanges. A 10-inch width is compact enough to fit on standard tub decks without overwhelming the space. It allows for a clean look against the tub's edge. You do not need to worry about the hardware protruding too far into the bathroom floor area. This dimension helps maintain a tidy appearance around the tub.

Height: 3.5 inches

The 3.5-inch height likely applies to the diverter valve or mounting hardware. This low profile keeps the controls close to the tub deck for easy access. You can operate the diverter without stretching or bending down excessively. It ensures the mechanism does not interfere with the shower curtain rings or the rod. This compact height is practical for tight spaces between the tub and the wall.

Length: 44.5 inches

This length typically describes the shower rod or the riser pipe. A 44.5-inch span provides adequate coverage for a standard shower curtain. It ensures the curtain stays mostly inside the tub area during use. You should check if this length matches your tub's width. If your tub is wider, you might need a longer rod. This dimension helps prevent water from splashing onto the bathroom floor.

Model: RX2300J-JUMBO

The RX2300J-JUMBO model number identifies this specific configuration from My PlumbingStuff. It distinguishes this kit from other sizes or finishes in their lineup. You can use this number to find replacement parts or compare it with similar products. It ensures you are purchasing the correct Jumbo version for your tub. Checking the model number helps verify compatibility with your existing plumbing setup before you buy.

Design and build details

According to the listing, the My PlumbingStuff Jumbo Clawfoot Shower Kit RX2300J uses heavy aluminum for its D-style shower rod. This material choice suggests a balance between durability and manageable weight for your clawfoot tub. The rod measures sixty inches in length. You can cut the aluminum to custom fit your specific tub dimensions. This flexibility allows you to adjust the width without buying a new unit. The kit includes twelve shower rings to hold your curtain in place.

The diverter is a key component of the build. It uses patented B3100 ball-valve technology to move water from the tub to the showerhead. This design aims to reduce the frequent damage seen in standard clawfoot fixtures. You get a chrome-plated brass riser that stands sixty-two inches tall. The listing also notes a thirty-six-inch ceiling support and special RX hardware for installation. These parts work together to create a stable overhead shower setup.

Finish options include chromed aluminum. The listing identifies this model as Jumbo size. This designation typically means larger proportions than standard kits. You should check your bathroom clearance before installation. The overall layout is designed for vintage tubs. It adds a modern shower function without altering the tub itself. The components are listed as durable materials meant for daily use.

Setup and everyday use details

Installing this kit requires fitting a sixty-inch D-style rod to your clawfoot tub. The heavy aluminum construction allows for custom cutting to ensure a perfect size match for your specific tub dimensions. This adaptability simplifies the initial setup process, as you can trim the rod to fit your exact space. The system includes a sixty-two-inch chrome-plated brass riser and a thirty-six-inch ceiling support to stabilize the structure. You will also attach jumbo wall flanges and special RX hardware to secure the assembly. The package provides twelve shower curtain rings, though you must supply the curtain separately. The B3100 diverter uses ball-valve technology to switch water flow from the tub spout to the showerhead. This design aims to reduce wear and tear compared to standard diverter mechanisms. For daily use, the jumbo chrome-bell showerhead delivers water over a broad area. The larger scale of the fixture accommodates taller users or those who prefer more overhead space. You simply hang the shower curtain on the included rings to create a contained spray zone. The chrome finish resists corrosion and maintains a clean appearance with regular wiping. The heavy-duty components suggest longevity under frequent use. You do not need complex tools beyond what is required for basic plumbing adjustments and rod cutting. The straightforward design means you can convert your vintage tub into a functional shower without major renovation work. The included hardware covers most standard installation needs for clawfoot models.

Before you buy this shower kit

You need a compatible drain assembly to make this system work. The B3100 diverter connects to your tub’s existing outlet, so verify that your clawfoot tub has the correct fitting. You will also need to purchase a shower curtain separately, as the kit includes only the twelve rings. The chrome-plated brass riser and D-style rod require standard mounting hardware, which is included. Check your bathroom’s ceiling height to ensure the sixty-inch rod fits comfortably without hitting the floor or ceiling awkwardly. This kit suits vintage bathrooms where you want to keep the soaking tub for filling but add shower functionality. It does not replace the tub; it adds a fixture. If you need a complete shower enclosure, this is not the right choice. It is a targeted upgrade for specific clawfoot models. Clean the chrome surfaces regularly to prevent water spots. The heavy aluminum rod is durable but can be cut, so measure twice before modifying. This option sits alongside other clawfoot accessories as a practical, no-frills solution for daily use.

Check before you buy

• Verify your tub has a compatible drain fitting for the diverter.
• Measure your bathroom height to ensure the rod fits properly.
• Check if your clawfoot tub supports the weight of the assembly.
• Confirm you have space for a shower curtain to hang freely.

The product at a glance

1

My PlumbingStuff Jumbo Clawfoot Shower Kit

Best for: Vintage clawfoot tub shower conversions

Type

Clawfoot Tub

Dimensions

44.5 × 10 × 3.5 inches

View on Amazon: My PlumbingStuff Jumbo Clawfoot Shower Kit Affiliate link

This kit upgrades a vintage clawfoot tub into a functional shower. It includes a heavy aluminum D-style rod, a jumbo chrome-plated brass riser, and a patented ball-valve diverter. The 60-inch rod and 62-inch riser accommodate most standard setups. It is designed for DIY installation and fits Jumbo-sized tubs. You get twelve curtain rings, though the curtain itself is not included. This system prioritizes durability and custom fitting for older bathrooms.

Pros

• Patented B3100 ball-valve diverter reduces damage risk
• Heavy aluminum D-style rod is cuttable for custom sizing
• Chrome-plated brass riser adds durability and style
• Includes 60-inch rod and 62-inch riser for coverage

Cons

• Shower curtain is not included in the package
• Specific fit limited to Jumbo-sized clawfoot tubs
• Requires DIY assembly and cutting of the rod

Good fit if

• You want to convert a vintage clawfoot tub into a shower
• You prefer durable brass and aluminum components over plastic
• You need a rod that can be cut to fit your space

Skip if

• You prefer a freestanding soaking tub without a shower
• You have a non-clawfoot tub that requires different mounting
• You want a complete kit with the shower curtain included

Verdict: My PlumbingStuff Jumbo Clawfoot Shower Kit is a sturdy, DIY-friendly solution for homeowners looking to add shower functionality to a vintage clawfoot tub. It suits those who value durable brass and aluminum parts and are comfortable with minor custom fitting.

Specifications side by side

Frequently asked questions

See also

• my plumbingstuff rx2300j jumbo clawfoot tub alternatives
• best bathtubs under 500
• weber weber jumbo joe compact review
• pooltohot inflatable hot tub review