PROFLO PFS6042RSK Hillsboro 60" x Review: Specs, Pros and Cons

What stands out

• Acrylic construction retains heat longer than other materials.
• Right drain placement simplifies plumbing for specific layouts.
• Three-wall alcove mount fits standard bathroom niches.
• 5-year residential warranty provides long-term coverage.

Who it fits

Key specs explained

Type: soaking

This tub is designed for deep immersion rather than quick rinsing. You can submerge your body fully, which supports muscle relaxation and stress relief. Soaking tubs typically have deeper water lines than standard bathtubs. If you prioritize long, calm baths over rapid showers, this configuration suits your routine better than shallow or jetted models.

Material: acrylic

Acrylic is a non-porous plastic that retains heat longer than porcelain or cast iron. It feels warm to the touch and resists staining, making daily cleaning straightforward. You can wipe it down with mild soap without worrying about chipping. This material choice keeps your bathwater warm for longer sessions, enhancing comfort during extended soaks.

Mount Type: three wall alcove

This installation style fits into a corner enclosed by three walls. Only the front panel is visible, which simplifies finishing work. You need adequate space in a bathroom alcove to accommodate the 60-inch length. This setup is ideal for standard bathrooms where space is limited and you prefer a clean, built-in look without exposed sides.

Drain Location: right

The drain is positioned on the right side when you face the tub from the front. This placement dictates how you arrange surrounding fixtures like vanities or showers. You must ensure your plumbing aligns with this specific side. Choosing the correct drain location prevents costly rework during installation and ensures proper water flow from the start.

Acrylic Build and Alcove Layout

According to the listing, the PROFLO Hillsboro tub uses acrylic construction. This material choice means the surface retains heat longer than some alternatives. You also get a finish that is easy to clean, which helps maintain hygiene with minimal effort. The unit weighs 110 pounds, a substantial mass that helps keep the tub stable during use. Its exterior is finished in white, a standard color that fits most bathroom decors without drawing attention away from the space.

The dimensions are 60 inches long and 42 inches wide, with a height of 19.8 inches. This footprint is designed specifically for a three-wall alcove installation. You will need a wall on each side to support and enclose the tub properly. The right-side drain placement dictates your plumbing layout. You must position your drain and overflow connections on the right side of the unit to ensure proper function. This fixed orientation limits flexibility in bathroom design.

As a soaking tub, the design prioritizes immersion over quick rinsing. The depth allows you to submerge your body fully, which supports muscle relaxation. The combination of the acrylic material and the soaking shape creates a calm bathing experience. You should verify your alcove dimensions before purchasing, as the specific length and width leave little room for error during installation. The weight and size require a sturdy floor to support the tub when filled with water.

Setup and everyday use

Installing this tub requires a three-wall alcove. You need framing on three sides to support the unit. The listing specifies a right drain placement. This dictates where you position the plumbing and the access panel. The tub weighs 110 pounds. You must ensure your floor structure can hold that load. The dimensions are 60 inches long and 42 inches wide. You need a bathroom space that accommodates this footprint. The height is 19.8 inches. This depth allows for deep water immersion without requiring excessive wall framing. The acrylic material is easy to clean. You can wipe the surface with standard bathroom cleaners. The material retains heat longer than some alternatives. This means your bathwater stays warm for more time. You do not need to add hot water frequently. The white color matches most standard tile and fixture schemes. The overflow feature prevents spills if you forget to turn off the tap. This adds a layer of safety during use. The tub is designed for soaking. You fill it with water and relax. The smooth acrylic surface feels pleasant against your skin. It does not harbor bacteria if cleaned regularly. The warranty covers residential use for five years. Commercial use has a one-year warranty. This suggests the build quality is suitable for home bathrooms. You install it once, then use it daily. The setup is straightforward if you have the right alcove space.

Before You Buy This Soaking Tub

Owning this PROFLO Hillsboro tub means planning for its specific footprint. The 60 by 42 inch dimensions require a dedicated alcove space. You must ensure your bathroom framing supports three walls. The unit weighs 110 pounds, so your floor structure needs to handle that load without reinforcement issues. Since the drain is on the right, you need to align your plumbing accordingly. This placement is fixed, so double-check your existing pipe locations before purchasing. The acrylic surface is easy to clean, but you should use non-abrasive cleaners to maintain the white finish. Avoid harsh chemicals that might dull the gloss over time. This soaking tub sits in the category of deep immersion baths. It suits those who prefer long, relaxing soaks over quick showers. Compare it with other alcove models to see if the depth matches your preference. Ensure the water capacity meets your comfort needs. Proper installation is key to preventing leaks and ensuring stability during use.

Check before you buy

• Verify your alcove is exactly 60 by 42 inches
• Confirm right-side drain matches your plumbing layout
• Check floor joists support the 110-pound weight
• Ensure three walls are available for installation
• Plan for non-abrasive cleaning supplies for acrylic

The product at a glance

1

PROFLO Hillsboro 60x42 Alcove Soaking Tub

Best for: standard alcove bathrooms with right drains

Type

soaking

Material

acrylic

Length

60 inches

Drain Location

right

Mount Type

three wall alcove

Color

White

View on Amazon: PROFLO Hillsboro 60x42 Alcove Soaking Tub Affiliate link

The PROFLO Hillsboro is a 60-inch acrylic soaking tub designed for three-wall alcove installation. It measures 42 inches wide and 19.8 inches high, holding water for a calm bathing experience. The white finish is easy to clean, and the acrylic material helps maintain heat longer. This tub features a right-side drain placement. It is a practical option for standard bathroom layouts where space is fixed.

Pros

• Acrylic construction retains heat effectively
• 60-inch length provides ample soaking space
• Right-side drain placement suits specific layouts
• 5-year residential warranty included

Cons

• Heavier at 110 pounds, requiring sturdy support
• Limited to three-wall alcove installation only
• Standard 19.8-inch height may not suit deep soaking preferences

Good fit if

• You need a standard 60-inch alcove tub
• You prefer acrylic for heat retention
• Your plumbing requires a right-side drain

Skip if

• You want a freestanding or corner design
• You require a left-side drain configuration
• You need a deeper tub than 19.8 inches

Verdict: PROFLO Hillsboro 60-Inch Soaking Tub is a solid choice for bathrooms with fixed alcove spaces and right-side plumbing. It delivers reliable heat retention and a standard footprint for everyday use.

Specifications side by side

Frequently asked questions

See also

• proflo pfs6042rsk hillsboro 60 x alternatives
• best PROFLO 60 Inch bathtubs
• elfinaura 60 x 26 x review
• deskshow 60 x 30 flip top review