Quick Tub Walk in Tub to Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This quick tub walk in tub to review covers the Quick Tub Walk-In Shower Conversion Kit. It is a kit that converts an existing bathtub into a step-in shower. The unit measures 27.6 inches in length. It also has a width of 7.5 inches. This design allows you to keep your current tub while adding a shower door. The kit includes a cap to switch between modes. You can install it without major plumbing changes. This approach saves time compared to a full remodel. The white finish matches most standard tubs. It is a practical solution for updating your bathroom layout.
What stands out
- Converts existing tubs to step-in showers in hours
- Includes patented cap to switch between shower and tub modes
- Compatible with steel, fiberglass, or cast iron tubs
- Comes with cutting template and industrial-strength adhesive
- Available in Wide, Narrow, and Xtra-Deep models
Who it fits
Good fit for
You should choose this kit if you have a steel, fiberglass, or cast iron tub and want to add a shower without demolition. The 27.6-inch length fits standard tubs. The ability to switch back to a soaking tub is useful if you still enjoy baths. It suits homeowners who want to avoid contractors and plumbing changes. The included template helps ensure a correct fit. This is ideal for those seeking a cost-effective accessibility upgrade.
Who should skip it
Skip this if your tub is not steel, fiberglass, or cast iron. The kit requires cutting the tub, so you cannot use it if you want to keep the tub intact. You must measure carefully to ensure the 27.6-inch length fits your space. If you need a permanent shower-only setup, the cap feature may be unnecessary. The installation requires cutting and bonding, which is not for everyone. Check the sizing guide before buying to avoid fit issues.
Verdict: This conversion kit offers a practical way to add a shower to an existing tub without major renovation. It is best for those who want flexibility and can handle the installation steps.
Key specs explained for this kit
Type: Walk in Tub to Shower Conversion Kit
This product is not a standalone tub. It is an insert designed to fit inside your existing bathtub. You install it over your current tub to create a step-in shower. This allows you to keep your soaking tub for filling while gaining walk-in access. It is ideal if you want accessibility without removing the entire tub structure or hiring a contractor for a full remodel.
Length: 27.6 inches
The insert measures 27.6 inches long. This length is standard for most alcove bathtubs. You must measure your existing tub to ensure the insert fits properly. If your tub is significantly longer or shorter, this kit may not work. This spec helps you determine if the conversion kit matches the footprint of your current bathroom fixture before you purchase.
Width: 7.5 inches
The width specification likely refers to the door or frame opening, not the entire tub. A narrow opening is typical for walk-in doors to maintain structural integrity. This dimension is critical for your entry. You need to ensure you can comfortably step through the opening. Compare this width with other kits to find the most accessible entry for your mobility needs.
Color: White
The unit is white, which is the standard color for most bathtubs. This helps the insert blend with your existing bathroom fixtures. It creates a uniform look rather than a mismatched appearance. If your current tub is white, this kit will likely match well. Check your current tub color before buying, as this kit does not come in other colors.
Design and Build Details
According to the listing, the Quick Tub Walk-In Shower Conversion Kit is a white insert designed to replace the standard tub experience with a step-in shower. The unit measures 27.6 inches in length. It has a width of 7.5 inches. The height is listed as 10.7 inches. These dimensions are critical for fitting the kit into your existing bathtub space. You must measure your current tub carefully before installation. The kit is available in different models, including Wide, Narrow, and Xtra-Deep. This variation allows you to select the size that best matches your specific tub dimensions. The product is made to bond to steel, fiberglass, or cast iron tubs. It includes industrial-strength adhesive to secure the insert in place. The surface is smooth and easy to clean. It is designed to match the look of your existing tub. The kit also comes with a patented cap. This cap allows you to switch between a walk-in shower and a full soaking tub. You can use the cap to restore the tub function when needed. The conversion process involves tracing, cutting, and bonding the kit to your tub. No plumbing changes are required. This design focuses on simplicity and accessibility. It provides a safe way to enter and exit your bathing area. The white finish ensures it blends with most bathroom decors. The narrow width of 7.5 inches for the door opening is a key feature for ease of use. You should follow the included template for accurate installation. This approach ensures a secure fit and proper function. The kit is a practical solution for those seeking to upgrade their bathing experience without a full remodel.
Setup And Daily Use Guide
Setting up this conversion kit requires careful preparation and precise execution. The listing specifies that you must measure your existing tub thoroughly before beginning. You use the included template to trace the cut-out area on your current bathtub surface. This step ensures the insert aligns correctly with your tub’s dimensions. The kit is designed to bond directly to steel, fiberglass, or cast iron tubs. You do not need to remove the old tub or hire a plumber. The process involves cutting the traced area and then applying the industrial-strength adhesive. The package includes two tubes of adhesive, an angled nozzle for precise application, and clear instructions. You attach the insert and the patented Quick Tub Cap to secure the conversion. This cap allows you to switch between a walk-in shower mode and a full soaking tub configuration in seconds. Daily use focuses on accessibility and convenience. The smooth, easy-to-clean surface matches the aesthetic of your existing tub. You step into the unit rather than climbing over a high tub wall. The design eliminates the need for demolition or significant plumbing changes. This makes it a practical option for updating an older bathroom. You simply trace, cut, and bond the kit to create a safe, step-in shower. The included sizing guide helps you verify that the 27.6-inch length and 7.5-inch width fit your specific tub model. Once installed, the unit provides a stable and secure bathing environment without the complexity of a full remodel.
Before You Buy This Kit
Before purchasing this conversion kit, you must verify your existing tub’s dimensions. The listing requires precise measurement to ensure the 27.6-inch insert fits correctly. You need to check if your current tub is made of steel, fiberglass, or cast iron, as the kit bonds to these specific materials. Do not proceed without using the included template to trace the cut-out area. You should also confirm that your bathroom layout allows for the 7.5-inch width of the insert. This product is not a standalone soaking tub. It is an accessory for your existing fixture. If you prefer a full walk-in tub with built-in jets or a deep soaking basin, this kit will not meet those needs. It is strictly for converting a standard tub into a step-in shower. Ensure you have the industrial-strength adhesive and tools ready for installation. This option suits those who want accessibility without a full remodel.
Check before you buy
- Measure your existing tub length and width carefully.
- Confirm your tub material is steel, fiberglass, or cast iron.
- Check if the 27.6-inch insert fits your space.
- Ensure you have adhesive and cutting tools ready.
The product at a glance
Quick Tub Walk-In Shower Conversion Kit
Best for: Retaining soaking tub functionality
- Type
- Walk in Tub to Shower Conversion Kit
- Length
- 27.6 inches
- Color
- White
- Dimensions
- 27.6 × 7.5 × 10.7 inches
View on Amazon: Quick Tub Walk-In Shower Conversion Kit Affiliate link
This Quick Tub kit converts an existing bathtub into a step-in shower. It includes a patented cap to switch between shower and soaking modes. The insert measures 27.6 inches in length, 7.5 inches in width, and 10.7 inches in height. It bonds to steel, fiberglass, or cast iron tubs. You get a complete kit with adhesive and templates. This suits those wanting a safe, accessible shower without a full remodel.
Pros
- Patented cap allows switching between walk-in shower and soaking tub
- Converts existing tubs in a few hours without plumbing changes
- Compatible with steel, fiberglass, and cast iron tubs
- Includes industrial-strength adhesive and cutting template
Cons
- Requires cutting into the existing tub surface
- Must measure existing tub precisely for proper fit
- Only available in white color
Good fit if
- You want to keep your soaking tub option
- You have a steel, fiberglass, or cast iron tub
- You prefer a DIY installation over hiring contractors
Skip if
- You need a pre-fabricated walk-in tub unit
- You cannot cut into your existing bathtub
- You require a color other than white
Verdict: Quick Tub Walk-In Conversion Kit offers a practical way to add accessibility while retaining soaking capabilities. It fits homeowners with compatible tubs who want a reversible solution.
Specifications side by side
| Spec | Quick Tub Walk-In Shower Conversion Kit |
|---|---|
| Type | Walk in Tub to Shower Conversion Kit |
| Length | 27.6 inches |
| Color | White |
| Dimensions | 27.6 × 7.5 × 10.7 inches |
| Model | Wide |
Frequently asked questions
Is the Quick Tub kit a standalone walk-in tub?
No, it is a conversion insert. You place it inside your existing bathtub to create a step-in shower. It does not replace the entire tub structure. This design allows you to keep the soaking capability of your original tub if you choose not to use the insert.
What dimensions does the Quick Tub insert have?
The insert measures 27.6 inches in length, 7.5 inches in width, and 10.7 inches in height. These specific measurements are critical for fitting into standard tubs. You must verify that your current bathtub interior matches these dimensions before installation to ensure a proper fit.
Can I use this kit to retain soaking tub functionality?
Yes, this kit is designed for reversible solutions. By installing the insert, you create a step-in shower option while leaving the original tub intact. You can remove the insert to use the tub for soaking again, making it suitable for homeowners who want both accessibility and traditional bathing.
What color is the Quick Tub conversion kit?
The unit is white. This color matches standard bathtub finishes for a cohesive look. The white finish blends with most bathroom fixtures, ensuring the conversion does not stand out visually against your existing bathroom decor or tub surface.
Does this product include a door?
The product data describes it as a walk-in shower conversion kit insert. It focuses on the dimensions and placement within the tub. The listing does not explicitly mention an integrated door mechanism. You should check if the kit includes a separate door or if it relies on the tub's existing structure.
Is the Quick Tub kit suitable for all tub types?
You must verify compatibility with your specific tub. The insert is designed to fit inside existing bathtubs made of steel, fiberglass, or cast iron. However, precise measurements are required. It may not fit tubs with unusual shapes or non-standard interior dimensions, so careful measurement is essential.