Signature Hardware 915546-61-RH-ND Arabella 61" Cast Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This signature hardware 915546 61 rh nd arabella 61 cast review focuses on the practical details of the Arabella 61 soaking tub. It is a 61-inch cast iron clawfoot model. The listing specifies a 30-gallon water capacity. These two specs define its core function. You get a deep soak in a durable vessel. The porcelain enamel coating adds scratch resistance. The double-slipper design allows reclining at either end. This guide explains how these published measurements and materials translate to your bathroom setup. We look only at what the data states, without personal testing or external opinions.
What stands out
- Cast iron construction with porcelain enamel coating for heat retention and durability
- 61-inch length with a 30-gallon water capacity for deep soaking
- Double-slipper design allowing comfortable reclining at either end of the tub
- Clawfoot mount type with a weight of 300 pounds for stability
Who it fits
Good fit for
This tub suits buyers who prioritize long, hot soaks and traditional aesthetics. The cast iron material retains heat effectively, making it ideal for extended bathing sessions. The double-slipper design is perfect for couples or users who prefer to recline at different ends. If you have the floor space for a 61-inch length and can support the 300-pound weight, this clawfoot model fits well. It is a strong choice for those wanting a durable, classic soaking experience without modern digital features.
Who should skip it
You should look elsewhere if you need a compact footprint. At 61 inches long and 30 inches wide, this tub requires significant floor space. The 300-pound weight means you must verify your floor can support the load. If you prefer a lightweight acrylic or fiberglass tub for easier installation, this cast iron option is too heavy. Additionally, if you want a single-slipper design for tighter corners, the double-slipper layout may not fit your specific bathroom geometry or usage habits.
Verdict: The Arabella 61 is a heavy-duty, traditional soaking tub defined by its cast iron build and double-slipper design. It is best for those with the space and structural support to enjoy long, heat-retaining baths.
Key specs explained for you
Length 61 inches
This length provides ample space for stretching out. You can lie flat without your feet touching the ends. It suits taller users who want full leg extension. Compare this to shorter 54-inch models if you need a compact fit for smaller bathrooms. The 61-inch size balances comfort with standard room dimensions.
Material Cast Iron
Cast iron is dense and heavy. It holds water heat longer than acrylic or fiberglass. You stay warmer during long soaks. The material is also rigid, reducing flex under your weight. Consider this if you prioritize thermal retention and durability over lightweight installation ease. It requires a sturdy floor due to its mass.
Water Capacity 30 Gallons
This volume determines how much water fills the tub. Thirty gallons offers a deep soak without excessive water usage. It supports comfortable immersion for one person. Compare this to larger 50-gallon models if you want a fuller rise. It is also suitable for filling quickly compared to higher-capacity units, saving time and water.
Mount Type Clawfoot
Clawfoot mounts mean the tub stands on legs rather than being built-in. You can access the back and sides for cleaning. It creates a classic freestanding look. This style requires floor space around the unit. Compare this to alcove tubs if you prefer a built-in appearance or easier plumbing access against a wall.
Weight 300 pounds
This weight includes the tub itself. When filled with water and a user, the total load increases significantly. You must ensure your floor can support this static and dynamic weight. Compare this to lighter acrylic tubs if you are in an upper-floor apartment. Structural reinforcement may be necessary for this heavy cast iron model.
Design and build details
The tub is constructed from cast iron with a white porcelain enamel finish. This material choice is practical for durability. The enamel coating resists scratches and simplifies cleaning. Cast iron also retains heat effectively, which supports longer, warmer soaks. You get a classic white surface that pairs with various bathroom styles. The listing notes four finish options for the feet, including oil rubbed bronze, chrome, black, or white. This allows you to match the hardware to your existing fixtures. The base is a clawfoot design, raising the tub off the floor. This layout requires a floor drain nearby for installation. It does not need a deck surround, keeping the footprint clean.
Dimensions are significant for placement. The unit measures 61 inches long, 30 inches wide, and 29 inches high. The width allows for comfortable side-to-side movement. The height ensures your legs are elevated when seated. Weight is substantial at 300 pounds. This mass provides stability but requires a structurally sound floor. The double-slipper shape is raised on both ends. You can recline comfortably at either end of the tub. This layout is flexible for single or shared use. The listing specifies a 30-gallon water capacity. This volume fills the deep basin adequately for soaking. Overflow and tap holes are pre-drilled on the rim. You will need to select your drain finish to match the feet you choose.
Setup and everyday use details
This clawfoot tub stands on four feet, which elevates the basin off the floor. The listed height is 29 inches. You need a sturdy, level floor to support the 300-pound weight. The cast iron construction ensures stability, but you must verify your floor can handle this load before installation. The feet finish matches your chosen drain, so coordinate those selections early. This model features a double-slipper design, meaning both ends are raised. You can recline comfortably at either side. This layout allows for flexible positioning in the bathroom. The tub holds 30 gallons of water. This capacity is substantial for soaking. You will fill it using the pre-drilled overflow and tap deck. The deck has 7-inch rim holes to accommodate standard faucets. The white porcelain enamel surface is non-porous and easy to wipe down. Cast iron retains heat well, so your water stays warm longer during a soak. Cleaning requires only mild soap and a soft cloth. Avoid abrasive pads that might scratch the enamel. The 61-inch length provides ample room for stretching out. You do not need to worry about your feet hitting the ends. This size suits taller users who want full leg extension. The right-hand drain placement determines how you position the tub relative to your plumbing. Check your existing drain location before finalizing the setup. The double-slipper shape offers versatility for couples or smaller bathrooms where space is tight.
Check Faucet Fit And Floor Strength
Before you buy the Signature Hardware Arabella 61, check your faucet compatibility. The listing notes a 7-inch rim hole deck. You will need separate faucets and drains that fit this spacing. The tub does not include these fixtures. Also, verify your floor can support the 300-pound weight. Clawfoot tubs require a level, sturdy surface. Without proper support, the cast iron may shift or crack. Consider the white porcelain enamel finish. It is easy to clean but can chip if struck hard. Use non-abrasive cleaners to maintain the surface. This model suits those who want a classic clawfoot look with modern soaking depth. Compare it to other 61-inch options if you need a double-slipper design. This specific listing is a single-slipper style. It fits one person comfortably. If you need space for two, look for a double-slipper variant. Ensure your bathroom has enough clearance for the 61-inch length and 30-inch width.
Check before you buy
- Confirm your faucet fits the 7-inch rim hole deck
- Verify your floor can support the 300-pound weight
- Ensure you have space for the 61-inch length
- Check if you need a single or double slipper design
The product at a glance
Signature Hardware Arabella 61" Cast Iron Tub
Best for: couples seeking symmetrical soaking positions
- Type
- Cast Iron Soaking Clawfoot Tub
- Material
- Cast Iron
- Length
- 61 inches
- Water Capacity
- 30 Gallons
- Mount Type
- Clawfoot
- Dimensions
- 61 × 30 × 29 inches
View on Amazon: Signature Hardware Arabella 61" Cast Iron Tub Affiliate link
The Signature Hardware Arabella is a 61-inch cast iron soaking tub with a 30-gallon water capacity. Its double-slipper design allows comfortable reclining at either end, making it suitable for couples. The porcelain enamel finish resists scratches and retains heat well for long soaks. It stands on clawfoot legs and includes pre-drilled holes for taps and overflow.
Pros
- Cast iron construction retains heat effectively for longer soaks
- Double-slipper design allows reclining at either end
- 30-gallon water capacity supports deep immersion
- Porcelain enamel coating is durable and easy to clean
Cons
- Weighs 300 pounds, requiring a reinforced floor
- Requires separate purchase of drain and faucet hardware
- Limited to 29-inch height, restricting overflow clearance
Good fit if
- You want a durable tub that holds heat for long soaks
- You need a double-slipper design for shared use
- You have a bathroom floor rated for heavy loads
Skip if
- You cannot support a 300-pound static load
- You need a pre-assembled faucet and drain set
- You prefer a lightweight acrylic material
Verdict: Signature Hardware Arabella 61" Cast Iron Tub is a heavy-duty option for couples who value heat retention and symmetrical reclining positions in a classic clawfoot style.
Specifications side by side
| Spec | Signature Hardware Arabella 61" Cast Iron Tub |
|---|---|
| Type | Cast Iron Soaking Clawfoot Tub |
| Material | Cast Iron |
| Length | 61 inches |
| Water Capacity | 30 Gallons |
| Mount Type | Clawfoot |
| Dimensions | 61 × 30 × 29 inches |
| Weight | 300 pounds |
| Color | White / Oil Rubbed Bronze Feet |
| Model | 915546-61-RH-ND |
Frequently asked questions
Is the Signature Hardware Arabella 61 tub symmetrical for couples?
Yes, the listing targets couples seeking symmetrical soaking positions. The 61-inch length and 30-inch width allow two people to recline comfortably. This design supports balanced seating for shared use. You can enjoy equal space without one person dominating the basin. The clawfoot style adds to the classic aesthetic while maintaining functional symmetry.
What are the exact dimensions of the Arabella 61 cast iron tub?
The tub measures 61 inches in length, 30 inches in width, and 29 inches in height. These dimensions define its footprint and interior volume. The 61-inch length accommodates taller users. The 30-inch width provides adequate side space. The 29-inch height positions the rim at a comfortable standing level for most adults.
How much does the Signature Hardware Arabella 61 tub weigh?
The tub weighs 300 pounds. This heavy weight results from its cast iron construction. Cast iron offers superior heat retention compared to acrylic. You must ensure your floor can support this load. The four claw feet distribute the weight, but a reinforced subfloor is often recommended for safety.
What finish options are available for this model?
The model features a white porcelain enamel finish on the basin. The feet are finished in oil rubbed bronze. This two-tone look adds visual interest to a classic clawfoot design. The white interior is easy to clean. The bronze feet provide a contrasting accent that complements traditional bathroom decor.
Does the Arabella 61 tub include faucets and drains?
No, the listing does not include faucets or drains. You need to purchase these fixtures separately. The tub has a 7-inch rim hole deck for faucet installation. Ensure your chosen fixtures match this spacing. This is common for clawfoot tubs, allowing you to select finishes that match your other bathroom hardware.
Is the Signature Hardware Arabella 61 suitable for small bathrooms?
The 61-inch length requires significant floor space. It may not fit in compact bathrooms. You need room for the 30-inch width and clearance for the claw feet. Measure your space carefully before purchasing. This model is better suited for master baths or larger spaces where ample room for movement is available.